Products details
  • 1/1

DRY-MIXED THIN-LAYER MASONRY MORTAR

Parameters
I know
Detail

Purpose:

The product is mainly used for binding all kinds of baked brick,lime-sand brick, concrete brick, stone and so on.

Character:

With plastic shrinkage, low shrinkage rate, and improve the wallcrack resistance, impermeability and resistance strain capacity, improve theintegrity and stability of wall.

Usage:

1, the basic level processing: the basic level should be dealtaccording to elevant regulations, to ensure construction quality.

2,superabsorbent brickwork should be wetting before construction, concretesurface should be use special purpose mortar interface agent.

3, Add mortarto clean water and mix to the desired consistency,mix a minimum of 2 minuteswith shelved 3-5 minutes recommended for best workability.recommended mortarand water ration is 7:1 by weight, the water is about 140~160 kg for one metricton dry mortar, mixing mortar should be paid attention to prevent bask and takeshelter from the wind.

4,the product can be operating time: at a time mixture of mortar should use upwithin two hours, supplementary waterused is prohibited after the solidification.

5,when the winter construction, temperature of mortar should not be lower than 5, it must be mixed with warm water iftemperature lower, but water temperature should not exceed 80. Construction environment temperature shouldnot be lower than 5,suggestion to stop construction when lower than 5.construction site should be taken insulation antifreezing measures.

6, Pay attention to moistureproof issues instore and transportation. usually,placed in the warehouse, and used waterproofcloth cover.

7, SHELF LIFE: 6MONTHS