Purpose:

The product is mainly used for all kinds of baked brick, lime-sandbrick, concrete brick, stone and so on indoor wall and outdoor.

Character:

Better crack resistance, permeability, water resistance, no crackoccurs after hardening.

Usage：

1, the basic level processing: the basiclevel should be dealt according to elevant regulations, to ensure constructionquality.

2, superabsorbent brickwork should bewetting before construction, concrete surface should be use special purposemortar interface agent.

3, Addmortar to clean water and mix to the desired consistency,mix a minimum of 2minutes with shelved 3-5 minutes recommended for best workability.recommended mortarand water ration is 6.5:1 by weight, the water is about 140~160 kg for onemetric ton dry mortar, mixing mortar should be paid attention to prevent baskand take shelter from the wind.

4, the product can beoperating time: at a time mixture of mortar should use up within two hours,supplementarywater used is prohibited after the solidification.

5, when the winter construction, temperature ofmortar should not be lower than 5℃, it must be mixed with warm water if temperature lower,but water temperature should not exceed 80℃. Construction environment temperature should not be lowerthan 5℃, suggestionto stop construction when lower than 5℃. construction site should be taken insulation antifreezingmeasures.

6, Pay attention to moistureproof issues instore and transportation. usually,placed in the warehouse, and used waterproof clothcover.

7, SHELF LIFE: 6MONTHS